国产精品一级AA毛片不收费,声之形,毛片大全高清免费,国产91流白浆喷水免费观看

Product description:
According to customer requirements, the glass fiber covered wire is evenly wrapped with 1-2 layers of alkali-free glass fiber on a copper (aluminum) conductor. At the same time, the glass fiber and the conductor are bonded into a whole. At present, the temperature resistance index of this type of product has three levels of 130, 155, and 180, and the insulation thickness generally has four levels of 20, 30, 40, and 50. This product is widely used in windings of transformers, electromagnets, welding machines or other similar electrical equipment products. The bare copper (aluminum) wire produced by the extrusion process is the most ideal material for the production of glass fiber-coated copper (aluminum) wire.
Executive standard:GB/T7672-2008

Production range:
Aluminum flat wire
Narrow side size a: 1.00mm—6.30mm
Wide side size b: 3.00mm-25.00mm
Copper flat wire
Narrow side size a: 0.80mm—5.60mm
Wide side size b: 2.00mm-16.00mm
Copper aluminum round wire
Diameter size: φ1.7—φ6.0
If the selected specification exceeds the above range, please contact us
Executive standard:GB/T7672-2008

Production range:
Aluminum flat wire
Narrow side size a: 1.00mm—6.30mm
Wide side size b: 3.00mm-25.00mm
Copper flat wire
Narrow side size a: 0.80mm—5.60mm
Wide side size b: 2.00mm-16.00mm
Copper aluminum round wire
Diameter size: φ1.7—φ6.0
If the selected specification exceeds the above range, please contact us

Material:
The aluminum flat wire should meet the requirements of GB5584.3-2009, and the resistivity at 20°C should not be greater than 0.0280Ωmm2/m
The rectangular copper wire should meet the requirements of GB5584.2-2009, and the resistivity at 20°C should not be greater than 0.017241Ωmm2/m

The glass filaments should be wound tightly and uniformly on the conductor. The winding directions of the two layers of glass filaments of the double-glass-fiber-coated copper (aluminum) wire should be opposite, and the insulation thickness of the double-glass-fiber-coated copper (aluminum) rectangular wire should meet the requirements of the following table. The insulation thickness (Bb) on the board is not assessed.

Related technical parameters of paper covered wire:

The breakdown voltage of the glass filament covered wire should meet the requirements of the following table

Characteristics of glass fiber covered wire
The insulating layer of glass fiber covered wire has certain abrasion resistance, adhesion and flexibility, and has good thermal shock and overload resistance.